 |
 |
 |
|
The Swift All-in-One KF4AV is a top-tier fusion splicer with precise alignment capabilities and the addition of a VFL and InGaAs power meter. The KF4AV systematically performing five major functions including stripping, cleaning, cleaving, splicing and sleeving, this device ensures optimum optical functionality and eliminates the extra time and expenses used to correct errors.
Features:
Remote maintenance via Internet
Integrated 5 function in one unit (stripping, cleaning, cleaving, splicing, protecting)
Internally-installed Visual Fault Locator (VFL) utilizes a 650nm red laser to locate and visibly display any failure points throughout the cable such as fiber breaks, flawed splices or connectors, and other issues
Internally-installed InGaAs (indium, gallium, arsenide) power meter can detect the amount of power that is lost during transmission, helping potential errors to be corrected before the cable goes into use
The All-In-OneTM system provides the most efficient use of space in any work environment compared to traditional stand alone and mechanical splicing solutions
State of the art thermal stripper saves time and eliminates fiber scratching and damage when compared to traditional hand stripping
Typical stripping time is 1.5 seconds
Single-action cleaver incorporates an efficient self-rotating blade and a built-in fiber chip collector to prevent skin penetration
One-touch alcohol cleaning pump with easy access for refilling
High degree of reliability and stable performance even in harsh environments
Compatible with a full offer of Fusion
Splice-On Connectors(SOC) manufactured to comply to the most up-to-date industry standards
Ideal for Enterprise, Data Center Broadband and FTTH network application
Specifications:
Fiber alignment: IPAAS Clad to Clad Alignment
Applicable type of fibers: 0.25mm, 0.9mm, 2.0mm, 3.0mm Indoor cable
Fiber count: Single fiber
Applicable fiber dimensions: Cladding diameter : 125μm, Coating diameter : 150μm~3mm
Fiber setting and cleaved length: 0.20in to 0.63in
Splicing modes: Splice mode: 300, Heat mode: 100
Typical splice loss: SM: 0.02dB, MM: 0.01dB, DS:0.04dB, NZDS: 0.04dB
Return loss: > 60dB
Splicing time: Typical 7sec with SM
Sleeve heating time: Typical 13sec with IS-60 mode, IS-60 sleeve
Applicable protection sleeve: 2.4in, 1.5in and micro sleeves
Storage of splice result: Data : 5,000ea Up to, Image : 5,000ea Up to
Tension test: 1.96N to 2.25N
Operating condition: Altitude: 0~5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof
Storage condition: Temperature: 40°F~176°F, Humidity: 0~95%
Dimension: 132(W) x 212(L) x 73(H)mm (Without rubber protector)
Weight: 1.5kg(Including battery)
Viewing method and display: 2 AXIS Two CMOS cameras with 4.3-inch color LCD monitor
Fiber view and magnification: X/Y : 110X , Max :220X
Power supply: Li-ion Battery(DC 14.8V, 3400mAh), 100 ~ 240V AC Charger
No. of splice cycles with battery: Typical 200 cycles
Electrode life:21,000 splices
Blade Life: 75,000
Terminals: USB
Included:
1 - Arc Fusion Splicer: SWIFT KF4A
1 - Battery: KF-3400
1 - Battery Adapter: FY1701000
1 - Instructions for use
1 - Spare electrode: EI-24
1 - Transporting Case: HC-11(Hard Case)
1 - Optical fiber holder
1 - Cooling Tray: CT-01(1.5in)
1 - Allen wrench: LD-3300
1 - USB Cable
1 - Hard Brush
1 - Soft Brush
1 - Tool Box
1 - Tweezers
Comparison between Swift Fusion Splicers
|
|
|
 |
|
 |
|
Skip to content