We have seen quite a few inspection cameras over the years, but Rexford Tools RICK (Rigid Inspection Camera Kit) is by far the best inspection camera we have seen for guys doing wire fishing and inspections of any kind. If you have used a conventional inspection camera or scope, you know the frustrations involved with getting the flexible neck positioned on your target; not with RICK.

Rexford Tool's RICK has a 11-3/4" (300mm) rigid stainless steel neck with a 90° offset camera and 2 LEDs. Looking inside a wall, ceiling, or floor is as simple as drilling a 3/8" (9mm) hole. The 90° offset camera allows you to simply spin RICK 360° and get a full view of everything. The two super bright built in LEDs allow for viewing in even the darkest of places. Use the thumb-wheel on the camera handle to turn off or adjust the two LEDs to the perfect light level.

If you have fished wires before, you know the frustrations involved with running wires where you can't see; let RICK help! Fishing a finished ceiling? Pop RICK up next to a heating vent or can light to see what you're up against. Have an impossible wall fish? Use RICK to see inside the wall and position your drill perfectly or see potential obstacles.

RICK is also great for inspections of any kind. With its IP67 rated shaft, RICK goes where it is dirty, grimy, wet, and even underwater! Inspect everything from heat exchangers to engine blocks.

To make things even easier, RICK is completely wireless! The inspection camera communicates with the monitor wirelessly at 2.4GHz; no wires to get tangled! It gets better, both the inspection camera and monitor have their own built in rechargeable batteries. Get 4 Hours of use on the camera and 3 Hours of use on the monitor (fully charged) When the batteries get low, just plug into any AC outlet with the included adapter and you will be ready to go in no time!

RICK's 3.5" wireless monitor offers a Micro SD slot which allows for recording video (.AVI) and still pictures (.JPG) for future viewing. Video can be played back on the 3.5" monitor, through an external TV using the included composite A/V cable, or through a computer. Connect to a computer via the built-in Mini USB port or put the Micro SD card (not included) into any Windows or MAC computer. This is a great feature for home inspectors, pest control, HVAC, or anyone that wants to show their customers problems beyond normal viewing.

The included Magnetic Monitor Mount is a great accessory for Electricians, HVAC Techs, Mechanics, or anyone that works on or around steel cabinets or enclosures. The Magnetic Monitor Mount slips into a slot on the back of RICK's monitor and allows you to mount it on anything Steel or Ferrous. With the twist of a thumb screw the monitor can quickly be adjusted to the perfect viewing angle.