 |
 |
 |
|
The VDV MapMaster 3.0 Cable Tester Deluxe PRO Kit from Platinum Tools combines continuity testing, mapping, generating tones and length measurement functions into a single easy-to-use unit for installation, troubleshooting, and maintenance for telco, network, or coax cable. The back-lit display, glow-in-the dark keypad and a built-in flashlight helps you to work in the dark. Whether your jobs are commercial or residential, the versatility and added features of the VDV MapMaster 3.0 makes it a best value cable verifier for the professional installer!
This new kit offers a complete set of all the accessories an installer would need to troubleshoot and work on networks. This kit offers a great cable tester with the ability to easily test and located multiple network cables at one time. Plus, Platinum Tools new ToneSeeker Tone Tracer Probe to locate cables or faults in cables.
Features:
Detects Open, Shorts, Miswires, Reverses & Split Pairs
Tests to T568A/B wiremap configuration: shorts, opens, miswires,reverses and split pairs
Single-ended testing for shorts & split pairs
Measures length in feet/meters
Identifies cable location on active ports using flashing Port Link Light
Easy to read, backlit LCD screen with large icons, glow-in-the-dark keypad and built-in LED flashlight for use in dark areas
Verifies continuity for multiple cable types (LAN, Phone and Video)
Audible beep for additional feedback
Identify up to 20 network or coax cable runs at a time
Measures cable length, distance to opens and breaks specific wires, pairs or all wires simultaneously
Master remote stored in main unit
Voltage detection warning icon
Continuous loop test mode for trouble shooting
Auto-off and timed backlight in any mode for low power consumption and long battery life
Audible Tone Generator, 4 selectable cadences
Specifications:
Display: Large 2.75” Backlit Monochrome LCD
Maximum Voltage: between any two connector pins without damage RJ12/RJ45/F: 50V DC or AC
Battery Life: 9V alkaline battery typical: Standby: 4 years / Active: 425 hours
Cable Types: Shielded or Unshielded; CAT7, CAT6A, CAT5e, CAT5, CAT4, CAT3, Coax
Maximum RJ Cable Length Testing: 0 to 1,000 feet (305 meters)
Minimum Cable Length for Split Pair Detection: 1.5 feet (0.5 meters)
Maximum Coax Cable Length: Varies depending on cable resistance varies
Low Battery Icon: flashes when battery voltage falls below 6V
Measurement Technology: Capacitance testing
Length Accuracy Without Length Constant: +/- 3% plus + 1 foot
Default Length Constant (Restored with power on reset): Voice (Twisted pair): 17.4 pF/ft / Video (Coax): 16.5 pF/ft
Data (Twisted pair): 15 pF/ft
Warranty: Limited 1 yr
Humidity: 10% to 90%, non-condensing
Operating Temperature: 0˚C/32˚F to 50˚C/122˚F
Storage Temperature: -20˚/-4˚F to 60˚C/140˚F
Dimensions: 6.8” x 3.2” x 1.4” (17.3 x 8.1 x 3.5 cm)
Weight: 10.8 oz. (305 grams) with battery and remote
Kit Includes:
1 - VDV MapMaster 3.0 Cable Tester
#2-#8 - Cable Tester Smart Remotes
1 - RJ45 Port Saver Adapter
2 - No-Fault Cable
2 - 5in CAT6 FTP Patch Cable
1 - RJ45-to-Alligator Toner Cable
1 - BNC Adapter Kit
1 - Platinum Tools Hanging Pouch
Platinum Tools Cable & Network Test Comparison Chart
Platinum Tools T130 Instructions
|
|
|
 |
|
 |
|
Skip to content