If you install or service any system that uses CAT5e/6/7 wiring, you are going to LOVE this toner tracker. In addition to the common RJ11 and alligator clips, the NF-889 has a built in RJ45 jack. No more adapters or cutting off the connector and stripping your wire, just plug it in!

The Tracker Wand is loaded with features as well. In addition to a volume controlled audible beep, the NF-889 has a red LED that also indicates when you've located your wire; perfect for loud work environments! If you are in an office and do not want to disturb your customers, plug in the included ear buds into the headphone jack. If you are working in a dark workspace, you can take advantage of the NF-889's built in LED flashlight. We've saved the best for last; once you've found your CAT5/6/7 cable, plug the RJ45 plug into the bottom of the Tracker Wand and the NF-889 will verify the cable's wiring is correct! 8 LED indicators confirm continuity quickly and easily.

The NF-889 is also great for other wires and cables. Alarm wire, speaker wire, coaxial cable, irrigation wire, invisible fencing, and many many more. With a single conductor and a good ground, you can follow an uncharted wire virtually anywhere!