Greenlee has done it again. They've taken one of the most commonly used electrician tools and made it faster, safer and easier. The new GT-65 voltage and continuity tester are capable of performing the basic tests expected from a voltage tester, but when Greenlee's GT-65 voltage tester are used, the results are just a cut above the rest. Some of the features that set the Greenlee voltage testers apart from the competition are auto-hold, non-contact voltage detection (EF), self-check and over-voltage warning. The auto-hold feature automatically activates when the tester is removed after taking a voltage reading. The LEDs flash the last measured value for 10 seconds. It's a hold feature without the hold button!

The EF function is a convenient non-contact method for detecting voltage. For more precision, such as distinguishing between current-carrying and ground wires, connect a test lead to the + input terminal and use it as a probe. Another convenience from Greenlee's GT-65!

Another distinguishing feature is the self-check function. The self-check function is a quick method to verify that the LEDs and LCDs are working properly. Finally, with safety always being in the forefront, the GT-65 voltage tester has an over-voltage warning feature. The 1000 VAC/380 VDC LED flashes if these levels are exceeded. The GT-95 LCD displays OL above 1000 VAC or DC.

As with all Greenlee test and measurement products, the GT- 65 voltage tester has Greenlee's lifetime limited warranty. In addition, it has safety category ratings of Category IV 600V and Category III 1000V.

Features:

AC/DC voltage and polarity measurement

Continuity test and single probe detection of live conductors for added flexibility

Overvoltage warning gives user visual notification that voltage levels have exceeded 1000V AC/ 380V DC

Safe, non-contact voltage detection

Auto-hold automatically activates when tester is removed from voltage reading

Visual and audible continuity

Lifetime Limited Warranty