Installations in Commercial and Residential Audio/Video, Security, and Broadband markets will be a "snap", thanks to the low compression force associated with traditional Snap-N-Seal connectors along with the patented non-blind entry with a floating pin design from F-Conn.
A patented 360° floating-pin basket is incorporated into the design of the ProSNS BNC RG6/Q. By positioning the pin basket at the back end of the connector, the insertion of the cable center conductor is easier and more accurate. Once the pin basket is properly seated inside the connector, it is then compressed around the cable center conductor by an outer plastic sleeve.
Features:
A patented internal "O" ring permits nut to spin freely while protecting against water migration
Patented guide sleeve (F) eliminate blind entry simplifying and providing consistent cable Insertion
Sleeves' sealing "O" ring prevents moisture migration
Patented, industry leading, removable sleeve reduces compression force
Specifications:
Quantity: 25 pieces
Connector Type: Male BNC
Cable Type: RG6/Q
Cable Center Conductor Diameter Limits: .0399 - .0418 inch
Cable Dielectric Diameter Limits: .180 - .193 inch
Cable Outer Jacket Diameter Limits: .265 - .305 inch
Cable Insertion Force: 20 lbf
Frequency: ≥-32 dB up to 1 GHz typical
Impedance: 75Ohm
Nut: Nickel/Tin Plated Brass
O-Ring: Ethylene Propylene
Body: Nickel/Tin Plated Brass
Contact: Gold Plated
Locking: No
Tool Compatibility: CPLCCT-SLMR or CPSNSCT-596 (compression), PSA59/6 (strip)
Termination Type: Compression
Environmental Space: Indoor/Outdoor
EU CE Mark: Yes
Suitability Indoor/Outdoor: Both Yes
Plenum (Y/N): No
Salt Fog: Passes 1000 hours ANSI/SCTE 143 2007
RFI Shielding: -85 dB (60% bonded foil)
Skip to content
Belden SNS RG6/Q BNC Connectors. 
